Picocom

Picocom 1.4 for Slackware64 14

Get SlackBuild files from:

• cd /tmp

• wget http://slackbuilds.org/slackbuilds/14.0/system/picocom.tar.gz

• tar xvzf picocom.tar.gz
• cd picocom

• wget http://picocom.googlecode.com/files/picocom-1.4.tar.gz

• su

• ./picocom.SlackBuild

• installpkg /tmp/picocom-1.4-x86_64-1_SBo.tgz

picocom-1.4-x86_64-1_SBo.tgz

Picocom 1.7 for Slackware64 14

http://picocom.googlecode.com/files/picocom-1.7.tar.gz

• cd /tmp

• wget http://slackbuilds.org/slackbuilds/14.0/system/picocom.tar.gz

• tar xvzf picocom.tar.gz
• cd picocom

• wget http://picocom.googlecode.com/files/picocom-1.7.tar.gz

• removepkg /tmp/picocom-1.4-x86_64-1_SBo.tgz

• vim picocom.SlackBuild, change from 1.4 to 1.7 VERSION=${VERSION:-1.7}

• ./picocom.SlackBuild

• installpkg /tmp/picocom-1.7-x86_64-1_SBo.tgz

picocom-1.7-x86_64-1_SBo.tgz

Exit prog: ctrl+a ctrl+x

Enable local echo: ctrl+a ctrl+c

Test with pen 3G

Connect pen to USB port. If the pen is connected to /dev/ttyUUSB0 run the follwoing commands:

• picocom -b 9600 /dev/ttyUSB0
• atz
• ati
• ctrl+a ctlr+x