= Toshiba C850D =

== X11 ==
On BIOS the touchpad is defined as internal mouse (PS/2)
'''/etc/X11/xorg.conf'''

{{{
Section "Module"
    Load        "dbe"  	# Double buffer extension
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
    Load        "type1"
    Load        "freetype"
    Load       "glx"
EndSection

Section "Files"
    FontPath   "/usr/share/fonts/local/"
    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/OTF/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/Speedo/"
    FontPath   "/usr/share/fonts/75dpi/:unscaled"
    FontPath   "/usr/share/fonts/100dpi/:unscaled"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/cyrillic/"
EndSection

Section "ServerFlags"
    Option     "DontZap"
EndSection

Section "InputDevice"
    Identifier	"Keyboard1"
    Driver	"kbd"
    Option "XkbLayout" "pt"
EndSection

Section "InputDevice"
    Identifier	"Mouse1"
    Driver	"mouse"
    Option "Device" "/dev/mouse"  
    Option "Protocol"    "PS/2"
EndSection

Section "Monitor"
    Identifier  "My Monitor"
    HorizSync   31.5 - 50.0
    VertRefresh 40-90
EndSection

Section "Device"
    Identifier  "VESA Framebuffer"
    Driver      "vesa"
EndSection

Section "Screen"
    Identifier  "Screen 1"
    Device      "VESA Framebuffer"
    Monitor     "My Monitor"
   DefaultDepth 24
    Subsection "Display"
        Depth       8
        Modes "1366x768" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes "1366x768" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes "1366x768" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes "1366x768" "1024x768" "800x600" "640x480"
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier  "Simple Layout"
    Screen "Screen 1"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection
}}}

'''/etc/kde/kdm/Xsetup'''
{{{
#! /bin/sh
# Xsetup - run as root before the login dialog appears
setxkbmap pt
}}}

=== ntpd ===
 * ntpdate pool.ntp.org 
 * chmod 755 /etc/rc.d/rc.ntpd 
 * /etc/rc.d/rc.ntpd start 
 * /etc/rc.d/rc.ntpd status 
 * ntpdate -q pt.pool.ntp.org

=== lilo.conf ===
{{{
append=" vt.default_utf8=1"
boot = /dev/sda

  bitmap = /boot/slack.bmp
  bmp-colors = 255,0,255,0,255,0
  bmp-table = 60,6,1,16
  bmp-timer = 65,27,0,255

prompt
timeout = 1200
change-rules
  reset
vga = 790
# Windows bootable partition config begins
other = /dev/sda1
  label = Windows
  table = /dev/sda
# Windows bootable partition config ends
# Linux bootable partition config begins
image = /boot/vmlinuz
  root = /dev/sda4
  label = Linux
  read-only
# Linux bootable partition config ends

image = /boot/vmlinuz-generic-3.2.29
  initrd = /boot/initrd.gz
  root = /dev/sda4
  label = SlackGen
  read-only
}}}

== Sound ==
 * aplay -l # card 1: Generic_1 [HD-Audio Generic], device 0: ALC269VC Analog [ALC269VC Analog]
 * cd /usr/share/sounds
 * aplay -D plughw:1,0 pop.wav # made sound , card 1 device 0

/etc/asound.conf
{{{
defaults.pcm.card 1
defaults.pcm.device 0
defaults.ctl.card 1
}}}

 * aplay pop.wav
 * usermod -G audio,users vitor # access user vitor to audio devices ...


== Install VirtualBox on Slackware64 14 ==
For 4.3.26 http://download.virtualbox.org/virtualbox/4.3.26/VirtualBox-4.3.26-98988-Linux_amd64.run

As root run the following commands:

 * cd <place where the downloaded virtualbox installer is>
 * chmod 755 VirtualBox-4.3.26-98988-Linux_amd64.run
 * ./VirtualBox-4.3.26-98988-Linux_amd64.run
 * usermod -a -G vboxusers,users,audio <username>
 * id <username> #check user groups

 As a normal user run the following:
 * virtualbox --help # check the version and parameters
 * virtualbox #start virtualbox

== Install Vagrant from source ==

Based on https://github.com/mitchellh/vagrant/wiki/Installing-Vagrant-from-source

As root run the following:

 * cd /tmp
 * mkdir gitVagrant
 * cd gitVagrant
 * git clone https://github.com/mitchellh/vagrant.git
 * cd vagrant
 * git pull origin master #get latest version
 * git reset a40522f5fabccb9ddabad03d836e120ff5d14093 --hard # reset to v1.3.5
 * gem install bundle #it may not be installed
 * bundle install
 * rake install
 * gem list
 * vagrant -v #check vagrant version

== Install libdvdcss ==
 * cd /tmp
 * wget http://slackbuilds.org/slackbuilds/14.1/libraries/libdvdcss.tar.gz
 * wget http://download.videolan.org/pub/libdvdcss/1.2.13/libdvdcss-1.2.13.tar.bz2
 * tar xvzf libdvdcss.tar.gz
 * mv libdvdcss-1.2.13.tar.bz2 libdvdcss/
 * cd libdvdcss/
 * ./libdvdcss.SlackBuild
 * installpkg xyz.SBo.tgz
 * ln -s /dev/sr0 /dev/dvd
 * chmod 664 /dev/sr0