= Toshiba C850D =

== X11 ==
On BIOS the touchpad is defined as internal mouse (PS/2)
'''/etc/X11/xorg.conf'''

{{{
Section "Module"
    Load        "dbe"  	# Double buffer extension
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
    Load        "type1"
    Load        "freetype"
    Load       "glx"
EndSection

Section "Files"
    FontPath   "/usr/share/fonts/local/"
    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/OTF/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/Speedo/"
    FontPath   "/usr/share/fonts/75dpi/:unscaled"
    FontPath   "/usr/share/fonts/100dpi/:unscaled"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/cyrillic/"
EndSection

Section "ServerFlags"
    Option     "DontZap"
EndSection

Section "InputDevice"
    Identifier	"Keyboard1"
    Driver	"kbd"
    Option "XkbLayout" "pt"
EndSection

Section "InputDevice"
    Identifier	"Mouse1"
    Driver	"mouse"
    Option "Device" "/dev/mouse"  
    Option "Protocol"    "PS/2"
EndSection

Section "Monitor"
    Identifier  "My Monitor"
    HorizSync   31.5 - 50.0
    VertRefresh 40-90
EndSection

Section "Device"
    Identifier  "VESA Framebuffer"
    Driver      "vesa"
EndSection

Section "Screen"
    Identifier  "Screen 1"
    Device      "VESA Framebuffer"
    Monitor     "My Monitor"
   DefaultDepth 24
    Subsection "Display"
        Depth       8
        Modes "1366x768" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes "1366x768" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes "1366x768" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes "1366x768" "1024x768" "800x600" "640x480"
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier  "Simple Layout"
    Screen "Screen 1"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection
}}}

'''/etc/kde/kdm/Xsetup'''
{{{
#! /bin/sh
# Xsetup - run as root before the login dialog appears
setxkbmap pt
}}}

=== ntpd ===
 * ntpdate pool.ntp.org 
 * chmod 755 /etc/rc.d/rc.ntpd 
 * /etc/rc.d/rc.ntpd start 
 * /etc/rc.d/rc.ntpd status 
 * ntpdate -q pt.pool.ntp.org

=== lilo.conf ===
{{{
append=" vt.default_utf8=1"
boot = /dev/sda

  bitmap = /boot/slack.bmp
  bmp-colors = 255,0,255,0,255,0
  bmp-table = 60,6,1,16
  bmp-timer = 65,27,0,255

prompt
timeout = 1200
change-rules
  reset
vga = 790
# Windows bootable partition config begins
other = /dev/sda1
  label = Windows
  table = /dev/sda
# Windows bootable partition config ends
# Linux bootable partition config begins
image = /boot/vmlinuz
  root = /dev/sda4
  label = Linux
  read-only
# Linux bootable partition config ends

image = /boot/vmlinuz-generic-3.2.29
  initrd = /boot/initrd.gz
  root = /dev/sda4
  label = SlackGen
  read-only
}}}

== Sound ==
 * aplay -l # card 1: Generic_1 [HD-Audio Generic], device 0: ALC269VC Analog [ALC269VC Analog]
 * cd /usr/share/sounds
 * aplay -D plughw:1,0 pop.wav # made sound , card 1 device 0

/etc/asound.conf
{{{
defaults.pcm.card 1
defaults.pcm.device 0
defaults.ctl.card 1
}}}

 * aplay pop.wav
 * usermod -G audio,users vitor # access user vitor to audio devices ...


== Install VirtualBox on Slackware64 14 ==
For 4.3.26 http://download.virtualbox.org/virtualbox/4.3.26/VirtualBox-4.3.26-98988-Linux_amd64.run

As root run the following commands:

 * cd <place where the downloaded virtualbox installer is>
 * chmod 755 VirtualBox-4.3.26-98988-Linux_amd64.run
 * ./VirtualBox-4.3.26-98988-Linux_amd64.run
 * usermod -a -G vboxusers,users,audio <username>
 * id <username> #check user groups

 As a normal user run the following:
 * virtualbox --help # check the version and parameters
 * virtualbox #start virtualbox

== Install Vagrant from source ==

Based on https://github.com/mitchellh/vagrant/wiki/Installing-Vagrant-from-source

As root run the following:

 * cd /tmp
 * mkdir gitVagrant
 * cd gitVagrant
 * git clone https://github.com/mitchellh/vagrant.git
 * cd vagrant
 * git pull origin master #get latest version
 * git reset a40522f5fabccb9ddabad03d836e120ff5d14093 --hard # reset to v1.3.5
 * gem install bundle #it may not be installed
 * bundle install
 * rake install
 * gem list
 * vagrant -v #check vagrant version

== Install libdvdcss ==
 * cd /tmp
 * wget http://slackbuilds.org/slackbuilds/14.1/libraries/libdvdcss.tar.gz
 * wget http://download.videolan.org/pub/libdvdcss/1.2.13/libdvdcss-1.2.13.tar.bz2
 * tar xvzf libdvdcss.tar.gz
 * mv libdvdcss-1.2.13.tar.bz2 libdvdcss/
 * cd libdvdcss/
 * ./libdvdcss.SlackBuild
 * installpkg xyz.SBo.tgz
 * ln -s /dev/sr0 /dev/dvd
 * chmod 664 /dev/sr0
 * mplayer -ao alsa -dvd:// 

== Upgrade from Slack64 14.0 to 14.1 ==
 * ctrl+alt+f1
 * mount /dev/cdrom /mnt/cdrom
 * cd /mnt/cdrom
 * cp slackware64 /root/ -r
 * cd /root
 * mv slackware64 slackware
 * telninit 1
 * login as root
 * cd /root/slackware
 * upgradepkg a/glibc-solibs-*.t?z
 * upgradepkg a/pkgtools-*.tgz
 * upgradepkg a/tar-*.tgz
 * upgradepkg a/xz-*.tgz
 * upgradepkg a/findutils-*.txz
 * upgradepkg --install-new /root/slackware/*/*.t?z
 * removepkg Terminal aumix kdegames kdemultimedia ksecrets mysql printer-applet quanta rexima scim-bridge xxgdb
 * Check file /etc/lilo.conf to see which old kernel is used #/boot/vmlinuz-generic-3.2.29
 * /usr/share/mkinitrd/mkinitrd_command_generator.sh -k 3.10.17 | bash
 * In /etc/lilo.conf use image=/boot/vmlinuz-generic-3.10.17
 * lilo -v
 * telinit 3
 * reboot
 * After the reboot shows the kernel version 3.10.17
 * On file /etc/kde/kdm/Xsetup add '''setxkbmap pt'''
 * In /etc/rc.d/rc.local add '''modprobe snd_mixer_oss'''
 * hwclock --set --date="2016-03-20 19:08:00"
 * hwclock -s


== Upgrade from 14.1 to 14.2 ==
=== Get and burn ISO ===
 * wget http://ftp.slackware.com/pub/slackware-iso/slackware64-14.2-iso/slackware64-14.2-install-dvd.iso
 * modprobe sg # for cdrecord
 * cdrecord -scanbus #identify the device DVDRAM LG GP08NU6B
 * cdrecord -dev=6,0,0 -pad -data slackware64-14.2-install-dvd.iso
 * eject /dev/sr0 # eject the DVD after burning
 * cd /
 * mount /dev/sr0 /mnt/cdrom #check DVD
 * cd /mnt/cdrom
 * ls
 * cd /
 * umount /mnt/cdrom 


=== Mount ISO ===
 * mkdir /packages
 * mount -o loop slackware64-14.2-install-dvd.iso  /packages
 * cd packages
 * telinit 1
 * upgradepkg /packages/slackware64/a/glibc-solibs-*.txz
 * upgradepkg /packages/slackware64/a/pkgtools-*.txz
 * upgradepkg /packages/slackware64/a/tar-*.txz
 * upgradepkg /packages/slackware64/a/xz-*.txz
 * upgradepkg /packages/slackware64/a/findutils-*.txz
 * upgradepkg --install-new /packages/slackware64/*/*.t?z
 * removepkg ConsoleKit apmd bluez-hcidump cxxlibs foomatic-filters \
      gnome-icon-theme imlib kdeadmin kdenetwork kdesdk kdetoys kwallet \
      lesstif libelf libjpeg libxfcegui4 networkmanagement obex-data-server \
      obexfs open-cobol oxygen-gtk3 phonon-mplayer phonon-xine pil portmap \
      procps qca-cyrus-sasl qca-gnupg qca-ossl udev xchat xf86-input-aiptek \
      xf86-video-modesetting xfce4-mixer xfce4-volumed xfwm4-themes
 * /usr/share/mkinitrd/mkinitrd_command_generator.sh -k 4.4.14 | bash
 * check lilo.conf
 * telinit 3
{{{
#!/bin/sh
CURRDIR=`pwd`

# upgrade stuff
function upgrade
{  
  # slackware64-14-2 ISO must be mounted in packages
  # mount -o loop slackware64-14.2-install-dvd.iso  /packages/
  # must be in single user mode !!!
  # telinit 1
  mkdir -p /tmp/slack14_2
  cd /tmp/slack14_2
  echo Backup /etc
  tar cvzf backetc14_2.tgz /etc
  
  echo Initial install
  cd /packages
  upgradepkg /packages/slackware64/a/glibc-solibs-*.txz
  upgradepkg /packages/slackware64/a/pkgtools-*.txz
  upgradepkg /packages/slackware64/a/tar-*.txz
  upgradepkg /packages/slackware64/a/xz-*.txz
  upgradepkg /packages/slackware64/a/findutils-*.txz
    
  echo Install other stuff
  upgradepkg --install-new /packages/slackware64/*/*.t?z
  echo Remove old packages
  removepkg ConsoleKit apmd bluez-hcidump cxxlibs foomatic-filters gnome-icon-theme imlib kdeadmin kdenetwork kdesdk kdetoys kwallet lesstif libelf libjpeg libxfcegui4 networkmanagement obex-data-server obexfs open-cobol oxygen-gtk3 phonon-mplayer phonon-xine pil portmap procps qca-cyrus-sasl qca-gnupg qca-ossl udev xchat xf86-input-aiptek xf86-video-modesetting xfce4-mixer xfce4-volumed xfwm4-themes 

  echo Configure kernel
  /usr/share/mkinitrd/mkinitrd_command_generator.sh -k 4.4.14 | bash
 
  echo Check lilo.conf to point to 4.4.14 in image=
  cat /etc/lilo.conf | grep image
  echo Run lilo
  lilo
  echo Probable error above if image does not have the kernel 4.4.14-smp
  echo telinit 3
  # reboot 
  # in case of problems to get a login in lilo after '''boot: SlackwareGen single''' to start in single user mode
  # /etc/rc.d/rc.modules should point to rc.modules.new to use modules for 4.4.14
}

upgrade
echo $CURRDIR
cd $CURRDIR
}}}

'''/etc/kde/kdm/Xsetup'''
{{{
setxkbmap pt
}}}

=== Maximum performance for the cpus ===
 * /etc/rc.d/rc.local
{{{#!highlight bash
echo "performance" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor 
echo "performance" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor

cpufreq-set --cpu 0 --governor performance
cpufreq-set --cpu 1 --governor performance
}}}
 * cpufreq-info 
 * chmod 755 /etc/rc.d/rc.cpufreq
 * Change SCALING_GOVERNOR in the rc file to performance

== Radeon HD 7310 driver ==
'''/etc/X11/xorg.conf'''
{{{
Section "Module"
    Load        "dbe"  	# Double buffer extension
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
    Load        "type1"
    Load        "freetype"
    Load       "glx"
    Load "dri"
EndSection

Section "Files"
    FontPath   "/usr/share/fonts/local/"
    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/OTF/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/Speedo/"
    FontPath   "/usr/share/fonts/75dpi/:unscaled"
    FontPath   "/usr/share/fonts/100dpi/:unscaled"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/cyrillic/"
EndSection

Section "ServerFlags"
    Option     "DontZap"
EndSection

Section "InputDevice"
    Identifier	"Keyboard1"
    Driver	"kbd"
    Option "XkbLayout" "pt"
EndSection

Section "InputDevice"
    Identifier	"Mouse1"
    Driver	"mouse"
    Option "Device" "/dev/mouse"  
    Option "Protocol"    "PS/2"
EndSection

Section "Monitor"
    Identifier  "My Monitor"
    HorizSync   31.5 - 50.0
    VertRefresh 40-90
EndSection

Section "Device"
    Identifier  "Radeon Framebuffer"
    Driver      "radeon"
EndSection

Section "Screen"
    Identifier  "Screen 1"
    Device      "Radeon Framebuffer"
    Monitor     "My Monitor"
   DefaultDepth 24
    Subsection "Display"
        Depth       8
        Modes "1366x768" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes "1366x768" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes "1366x768" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes "1366x768" "1024x768" "800x600" "640x480"
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier  "Simple Layout"
    Screen "Screen 1"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

Section "DRI"
  Mode 0666
EndSection
}}}

Add to '''/etc/rc.d/rc.local''' 
{{{
echo "10" > /proc/sys/vm/swappiness
}}}

Add to '''/etc/rc.d/rc.modules.local'''
{{{
/sbin/modprobe drm
/sbin/modprobe radeon
}}}

== AMD driver ==
 * https://www.amd.com/en/support/apu/amd-e-series-processors/amd-e1-series-apu-for-laptops/e1-1200-radeon-hd-7310
 * AMD Catalystâ„¢ 15.9 Proprietary Linux x86 Display Driver
 * https://drivers.amd.com/drivers/linux/amd-catalyst-15.9-linux-installer-15.201.1151-x86.x86_64.zip
{{{
error: Detected X Server version 'XServer _64a' is not supported. Supported versions are X.Org 6.9 or later, up to XServer 1.10 (default:v2:x86_64:lib:XServer _64a:none:4.4.172:)
Installation will not proceed.
}}}

 * xrandr --output LVDS  --mode 800x600

== Upgrade to Slackware64 15.0 ==
{{{#!highlight bash
time dd if=slackware*15*iso of=/dev/sdb
# took about 29 minutes
reboot
#F12 boot menu
#select pt.map
#login root
setup
#target partition /dev/sda4 
#No format 
#Add partitions to fstab: no 
#Install from usb stick 
#all packages, full
#configure
#skip usb stick 
#simple lilo, standard, MBR
#imps2, no gpm
#configure network: no
#change /etc/inittab to 3
df -h
dd if=/dev/zero of=/swapfile1 bs=1024 count=524288
chown root:root /swapfile1 
chmod 0600 /swapfile1 
mkswap /swapfile1 
swapon /swapfile1
free -m
vi /etc/fstab
# /swapfile1 none swap sw 0 0
free -m
htop
}}}
 * installpkg wmclockmon-0.8.1-x86_64-1_SBo.tgz
 * installpkg wmmon-1.0b2_p14-x86_64-1_SBo.tgz

=== Disk structure ===
{{{
/dev/sda4       428445696 592233266 163787571  78.1G 85 Linux extended
/dev/sda5  *    428447744 583845887 155398144  74.1G 83 Linux
/dev/sda6       583847936 592233266   8385331     4G 82 Linux swap
}}}

=== /etc/modprobe.d/blacklist.conf ===
{{{
blacklist rtl8192ce
}}}

=== /etc/modprobe.d/rtl8192ce.conf ===
{{{
options rtl8192ce ips=0 fwlps=0
}}}

=== /usr/share/xsessions/windowmaker.desktop ===
{{{ 
[Desktop Entry]
Version=1.0
Name=WindowMaker Session
Comment=Use this session to run WindowMaker as your desktop environment
Exec=wmaker --for-real
Icon=
Type=Application
DesktopNames=WindowMaker
}}}

=== ~/GNUstep/Library/WindowMaker/autostart ===
{{{
setxkbmap pt &
}}}